Pick up a bead of the pre-mixed Green Glitter and place this on form starting from the end of the Raspberry Red and finishing at the end of the form in a point. Wipe your brush

Apply Totally Clear to the entire nail to encapsulate the design, making sure to build up the stress area. Allow to set. You can gently pinch the nail using your thumbs or Perry Tweezers to enhance the ‘C’ curve.

Once the acrylic has completely set gently remove the nail form by breaking the tabs then starting at the point, pull the nail form down and away from the nail.

File and shape your nail using a 150 grit Endurance File.Remove the dust and wipe over the nail using Cleanse to remove any remaining dust particles.

Apply Glaze n’ Go and cure for 90 seconds.

You can now start to create the holly. Pick up a bead of Soft White Acrylic then a bead of Leaf Green TechNail colour then dip this into the Basic Black, so the colours are layered, this creates a gradient effect when the bead is patted out on the nail. Shape the acrylic into a holly leaf and add detail using the Perry Tweezers. Repeat this process to create another leaf.